prepping a car body for paint

Now we are ready to. When the final coat has dried wet-sand the primer with 800-1200 grit sandpaper.

Plaza Motors Collision Services Paint Reconditioning

Rust and dents are removed and we replace or repair floors as needed.

. Place the penny with Lincolns head facing up in the tread. We prime the vehicle test fit all the panels inspect the work. Let each coat or paint dry.

Set up a small area to the side with any other painting supplies youll be needing throughout the vehicle prepping or painting process -- clean rags sanding supplies brushes etc. Use the Penny Test by placing a penny in between the tread of your tires. Bare steel is protected by etch prime.

Make sure that you let the coats dry before you start with additional coats. If his head is no longer visible you are fine on your tires. Use a hairdryer to make your paint dry faster or just leave it under a fan.

Wipe the car down again with. If you have been in a collision and looking for the most affordable and trusted collision repair experts call Texas Body Works at 972 250-6722 for any questions or. Our auto body paint shop can perform a variety of paint services from minor paint repair and scratch repair to complete auto painting and everything in between.

Be sure to sand out any drips scratches or other rough spots.

How To Wet Sand Prep A Car For Paint Video Dailymotion